Installing a wooden floor in your home is a long, messy job that usually requires the recruitment of staff. Trafficmaster flooring makes systems that do not even need a special floor heating mat they just sit directly on existing flooring subjects. Use your hammer and spit to gently remove the outer layer of the floor trim. Do not break it. Point your nails out with your hammer and set aside trim.
Remove all carpets or other obstructions on the floor so that you remain with a dry solid surface. Sweep the surface. From the long wall of the room, lay your first course in awesome Trafficmaster flooring, trim the boards at the ends and around them next to the wall, put 1/4 inch out of the wall. Cut the last bit into the course on its own saw so it suits, once again, leave a 1/4 inch gap.
12 Photos Gallery of: Install Wood Trafficmaster Flooring
Add the following rows next applying wonderful Trafficmaster flooring to the first, cut them together with their tongue and groove connections and cut the end pieces as needed. Do not forget to keep 1/4 “space at the walls. Replace the trim when the entire floor is laid using your trimmer nail gun to attach the trim to the walls. Do not push the trim nails through the floor.